Welcome to another Branch Line Society foray into the often hidden world of heritage railways and unusual traction.
Our day began, albeit a few minutes late, when we departed Rowsley South (or Rowsley Very South as some call it) for Matlock. This was behind Heritage Shunter Trust's 09001 leading four brakevans, with 08573 trailing. After passing Darley Dale nonstop (just), we reached Matlock Peak Rail (P2), right hand on arrival at the Network Rail station, for our second and final pick up. With 70 members onboard, 08573 took over for the run to Matlock (Riverside) station. Here, we stopped on the through / run round line to reverse into the headshunt, normally only available to locos running round Peak Rail services reversing here when they are not 'top & tailed'. 09001 stopped a very short distance from the buffers, then returned us to the through line, reversing to pass through the platform into the headshunt again with overlap achieved at the buffer stop end. These manoeuvres completed all available track at Riverside.

Our Peak Rail Shunter Track Bash approaches Matlock P2 from Rowsley (very) South. (TRACKmaps 4 p14E 2022) The other track is the connection to Network Rail P1.
[© Phil Logie 2026]

09001 at Matlock P2 - looking south towards Derby.
[© Robin Morel 2026]

RMS Locotec Class 08 08573 'Bob' was on the other end of the train at Matlock P2, looking southeast towards Derby.
[© Phil Logie 2026]
We then returned to Rowsley (still very) South for a nonstop slow pass through the platform to the end of line where the gate was briefly opened to allow a few additional yards in the track that became progressively buried in mud (Buxton here we come!). We soon returned to the platform, noting that 08308 had now emerged from the main depot area and was waiting to come into service. At the platform, everyone detrained while 08308 replaced 09001, its passenger work for the day complete.

Positive Traction Class 08e 08308 waiting to attach to our tour train at Rowsley South.
Behind is the Ashover Light Railway Society track and (to the right) station (no public passenger running but they have run demonstration freight trains).
[© Phil Logie 2026]

08573 with the tour train at Rowsley (very) South.
[© Robin Morel 2026]
The next stage of our visit, with 08308 and 08573, now began. A short journey cleared the points south of the platform at Rowsley South before reversing onto the platform loop and again, to reach the south end siding covering the available track. Normal Peak Rail Sunday service was running, so we had to clear the run round loop at Rowsley South for the steam loco to run round. This was achieved by retiring to the line used by the Heritage Shunters Trust (HST). Our tour then continued back onto the run round loop which was completed by a further visit to the end of line close to ROWSLEY STH JCN (sic) signal box. From here, it was the long way round to the HST platform via the platform loop and the connecting line.
The next piece of track, from the HST platform, will have been traversed many times by our members taking part in the excellent HST galas over the years but, on this occasion, coverage was limited by the stabled vehicles alongside the HST shed. We then reversed to the points giving access to the shed roads.
The right hand siding on approach allowed 08308 to enter the shed, just, and this was followed by the left hand siding up to the shed doors. All in all, some very short distances enabled by point clipping which kept the local volunteers busy; our thanks to them for the sterling work they did all day. The train returned to the HST gala 'platform'. The HST shed is well worth a visit (conducted tours are available), to give an indication of the variety of shunting locomotives employed during the 1950s and early 1960s.
This break, at the HST platform, was while the locos and stock stabled in the sidings and in the main Peak Rail workshops were moved for our tour. These comings and goings removed three steam shunters, 37152 (masquerading as 37310 from the time it was allocated to Motherwell) and 37901 (a trial rebuild for the Class 38 which did not materialise; it had been a visitor to the Twin Peaks Gala earlier in the weekend). Once these moves were complete, and they were only the start, track coverage continued.

At Rowsey South, 09001 clears stock out of the way ready for our tour to do the track.
[© Robin Morel 2026]
Access to the lines adjacent to the Peak Rail Depot meant a trip into the short siding adjacent to the ROWSLEY STH JCN signal box before reversing, using the left hand siding, pausing over the Ash Pit, then into and through the main shed on Road 'One': 08308 reached daylight through the south end. We then reversed over the crossover between Sidings 1 and 2, waiting briefly on the latter before reversing again to allow Class 44 D8 and a stores van to be moved from Road 'Four' by a resident shunter. Patience was rewarded now the main line locos were out of the way, as a further traversal of the crossover followed by another stop (and yet another reversal) meant we could then cover Road 'Four' in its entirety. During this time, both sidings and our exit were occupied by the mainline locos. So, it was back to Siding 1 yet again to allow D8 to be returned to its usual home on Road 'Four' and for us to depart via Siding 2 to again visit the headshunt by the signal box and return to the HST platform where our tour terminated.

Inside Rowsley South locomotive shed as seen from our tour train.
[© Phil Logie 2026]

Thomas Hill Vanguard TH284V removes Class 44 D8 'Penyghent' and a waggon from Rowsley South locomotive shed for our tour to proceed there.
[© Phil Logie 2026]
Our thanks to the volunteers who clipped the points needed to ensure our safety, notwithstanding the squally showers which punctuated the proceedings and the owners of the three locomotives provided for our charter. The shunters performed flawlessly all day. Our thanks to all those who contributed to a very successful day on Peak Rail, including Kev Adlam the organiser, also the excellent and busy café.